Nestamp Float F-680
- Accessory for Nestamp Bellfog Ultrasonic Humidifier NH-6000
- Dimension (W x H x D) : 170 x 70 x 40mm
f680
Related products
Close
Nestamp Continuity Tester CT333
| Wire Verification Distance | 3000 meters (26 Gage min.) |
|---|---|
| Beeper Sound | About 85dB |
| Continuity Confirmation | Equal to or less than 2KΩ |
| Fuse | 0.5A/250V |
| Power Supply | 9V Battery, 6F22 or equivalent |
| Operating Environment | -10°C~45°C, <85%RH |
| Storage Environment | -10°C~50°C, <85%RH |
| Dimension (W x H x D) | 75 x 115 x 29mm (with test leads folded) |
| Weight | About 111g (including battery) |
Close
Nestamp Humidity Thermometer DH-500
| Temperature Range | Indoor -10°C~50°C (+14°F~122°F) |
|---|---|
| Outdoor -50°C~90°C (-58°F~194°F) | |
| Indoor Humidity Range | 20%~99% RH |
| Power Supply | 1.5V (AAA size x 1) |
| Dimension (W x H x D) | 87 x 150 x 24mm |
Close
Nestamp Vent Cap E-039
- 4” Inch Air Vent Cover
- Dimension (W x H x D) : 105 x 105 x 52mm
Close
Xstop Electric Fence Energizer EL101
The electric fence is a simple and effective way to create secure zones. The ease of installation and use of this product can electrify all the amenities. Required for a variety of animals. This energizer is suitable for a variety of applications including the protection of gardens, parks, pools, plantations as well as livestock.
This energizer is made with products which conform to standards installed according to the manufacturers' instructions. The discomfort caused by making contact with the fence will not cause injury, and will result in training of animals that meet the limits of the enclosure. The electric fence is not dangerous for children or sensitive individuals.
| Input Voltage | AC 240V 50Hz |
|---|---|
| Output | 1 Joules / 20km |
| Dimension (W x H x D) | 110 x 185 x 47mm |
Close
Nestamp Sound Detector FSD-Q5
| Limit Range | 30 to 130dB |
|---|---|
| Resolution | 0.1dB |
| Frequency Range | 31.5Hz to 8KHz |
| Sensor Type | 27mm (1.1") piezoelectric mic. |
| Operating Humidity | Less than 80% RH |
| Power Source | 9V Battery |
| Low Battery Indication | Red LED flashing |
| Battery Life | 180 hours continuous (approx); 30 days @ 6 hours/day |
| Dimension (W x H x D) | 45 x 115 x 37mm |
| Weight | 56g |
Close
Nestamp Focus+ Headlight HLC-Q7
One of the major advantages of headlights is that they free up users’ hands for a variety tasks. With NESTAMP HLC-Q7, users can achieve even more. This new member of the Focus+ headlight series is a feast of luminaire technologies.
Right at the center of HLC-Q7 is a XP-E [Q4] Cree White LED. Taking full control of this latest Cree product, a revolutionary design is implemented. When the Operation Button is depressed, the LED outputs at the peak 125 lumens, then dims in a smooth run. Just release the finger at any time of the desired level of balance between illumination and battery life. Another advanced output regulating mechanism, Focus Control, is also available by twisting the iris ring that surrounds the core LED. Whether for night trail walk, campsite reading or garage chores, there’s always the right mode for the requisite illumination.
Lined up under the white, crowned gem in a smiling curve are four 5mm LEDs, two in red and one each in green and in blue. They serve a variety of purposes. The red duo is generally used for night vision. In less a romantic emergency situation, they can flash out the international SOS code. The green LED is for map reading and signaling while blue illumination helps telling blood from other fluids. For the best user experience, the core and auxiliary emitters are controlled and operated independently.
With adjustable light angle adding further to the high degree of flexibility, the versatile HLC-Q7 is an all-in-one solution for multi-range users.
- XP-E [Q4] Cree White LED - Up to 125 Lumens
- XP-E [Q4] Cree White LED - Lifetime Up to 50,000 Hours
- ø5mm Colour LEDs - Red, Blue & Green
- Smooth Dimming Control for White LED
- Focus Control Function for White LED
- SOS-Flashing for Red LEDs
- Free Projection Angle
- Water Resistant
- Dimension (W x H x D) : 62 x 50 x 43mm
Close
Swallow Hammer Tacker For Plastic Staples JY-590A
Used by forestry commissions, sawmills, timber merchants and garden centres. For the simple labelling and marking of wood, lumber, timber, fencing and other wood products.
Avoid damages to tools, saws or planks. The staples are rustproof, weatherproof and UV resistant.
Types of staple that can be used:
6mm-10mm: Jann Yei 1308PL, Omer 81P, Raptor S/05-25
Dimension (W x H x D) : 305 x 55 x 40mm
jy590a
Close
Swallow Plastic Staples 1308PL (1.15mm)
- Staples (1.15mm)
- 1120 pcs
- Weatherproof and UV Resistant
- Rustproof
- Made In Taiwan
- Dimension (W x H x D) : 60 x 140 x 20mm