Vetus Tweezer ST-11
- Fine Tip Straight (140mm)
- Non-Magnetic
- Anti Acid Steel
st11
Related products
Close
Vetus Tweezer MJP-16-11
- Fine Curved Tip (125mm)
- Made of premium stainless steel
- Non-Magnetic
- Anti Acid Steel
Close
Vetus Tweezer MJP-16-12
- Long Fine Tip (125mm)
- Made of premium stainless steel
- Non-Magnetic
- Anti Acid Steel
Close
Swallow Staple Gun Tacker For Plastic Staples JY-550A
Used by forestry commissions, sawmills, timber merchants and garden centres. For the simple labelling and marking of wood, lumber, timber, fencing and other wood products.
Avoid damages to tools, saws or planks. The staples are rustproof, weatherproof and UV resistant.
Types of staple that can be used: 6mm-8mm of all the staples below
- Jann Yei 1110PH
- Jann Yei 1308PL
- Jann Yei 1309PL
- Jann Yei 1310PH
- Omer 81P
- Omer 82P
- Raptor S/05-25
- Raptor SH/05-37
- Taga Plus TA1010
Close
Nestamp Humidity & Temperature Sensor D-50
- Accurate Humidity & Temperature Probe
- 15 Meters Long Cable
Close
Swallow 3 Way Staple Gun Tacker JY-821
Used by forestry commissions, sawmills, timber merchants and garden centres. For the simple labelling and marking of wood, lumber, timber, fencing and other wood products.
Types of staple that can be used
6-14mm x 10.6mm
- Jann Yei 906F, 908F, 910F, Rapid #13
- Arrow JT21
- Esco #530
- KWB #053
- Novus #53
- Rapid #53
- Rocafix #3
- Stanley #A/53
- Jann Yei 1006F, 1008F, 1010F, 1012F, 1014F
- Arrow 1810
- Esco #300
- Jann Yei T15
- Novus #J
- Rocafix #8
Close
Nestamp Float F-600
- Accessory For Nestamp Centrifugal Humidifier NM-5500
- Dimension (W x H x D) : 140 x 45 x 70mm
Close
Nestamp Humidity Thermometer Clock DT-800
| Temperature Range | Indoor -10°C~50°C (+14°F~122°F) |
|---|---|
| Outdoor -50°C~90°C (-58°F~194°F) | |
| Indoor Humidity Range | 20%~90% RH |
| Power Supply | 1.5V (AAA size x 1) |
| Dimension (W x H x D) | 80 x 145 x 24mm |
Close
Nestamp Focus+ Headlight HLC-Q7
One of the major advantages of headlights is that they free up users’ hands for a variety tasks. With NESTAMP HLC-Q7, users can achieve even more. This new member of the Focus+ headlight series is a feast of luminaire technologies.
Right at the center of HLC-Q7 is a XP-E [Q4] Cree White LED. Taking full control of this latest Cree product, a revolutionary design is implemented. When the Operation Button is depressed, the LED outputs at the peak 125 lumens, then dims in a smooth run. Just release the finger at any time of the desired level of balance between illumination and battery life. Another advanced output regulating mechanism, Focus Control, is also available by twisting the iris ring that surrounds the core LED. Whether for night trail walk, campsite reading or garage chores, there’s always the right mode for the requisite illumination.
Lined up under the white, crowned gem in a smiling curve are four 5mm LEDs, two in red and one each in green and in blue. They serve a variety of purposes. The red duo is generally used for night vision. In less a romantic emergency situation, they can flash out the international SOS code. The green LED is for map reading and signaling while blue illumination helps telling blood from other fluids. For the best user experience, the core and auxiliary emitters are controlled and operated independently.
With adjustable light angle adding further to the high degree of flexibility, the versatile HLC-Q7 is an all-in-one solution for multi-range users.
- XP-E [Q4] Cree White LED - Up to 125 Lumens
- XP-E [Q4] Cree White LED - Lifetime Up to 50,000 Hours
- ø5mm Colour LEDs - Red, Blue & Green
- Smooth Dimming Control for White LED
- Focus Control Function for White LED
- SOS-Flashing for Red LEDs
- Free Projection Angle
- Water Resistant
- Dimension (W x H x D) : 62 x 50 x 43mm