Swallow Hammer Tacker For Plastic Staples JY-590A
Used by forestry commissions, sawmills, timber merchants and garden centres. For the simple labelling and marking of wood, lumber, timber, fencing and other wood products.
Avoid damages to tools, saws or planks. The staples are rustproof, weatherproof and UV resistant.
Types of staple that can be used:
6mm-10mm: Jann Yei 1308PL, Omer 81P, Raptor S/05-25
Dimension (W x H x D) : 305 x 55 x 40mm
jy590a
Related products
Close
Nestamp Humidity & Temperature Sensor D-50
- Accurate Humidity & Temperature Probe
- 15 Meters Long Cable
Close
Nestamp Sound Detector FSD-Q5
| Limit Range | 30 to 130dB |
|---|---|
| Resolution | 0.1dB |
| Frequency Range | 31.5Hz to 8KHz |
| Sensor Type | 27mm (1.1") piezoelectric mic. |
| Operating Humidity | Less than 80% RH |
| Power Source | 9V Battery |
| Low Battery Indication | Red LED flashing |
| Battery Life | 180 hours continuous (approx); 30 days @ 6 hours/day |
| Dimension (W x H x D) | 45 x 115 x 37mm |
| Weight | 56g |
Close
Vetus Tweezer MJP-16-11
- Fine Curved Tip (125mm)
- Made of premium stainless steel
- Non-Magnetic
- Anti Acid Steel
Close
Nestamp Humidity Thermometer Clock DT-800
| Temperature Range | Indoor -10°C~50°C (+14°F~122°F) |
|---|---|
| Outdoor -50°C~90°C (-58°F~194°F) | |
| Indoor Humidity Range | 20%~90% RH |
| Power Supply | 1.5V (AAA size x 1) |
| Dimension (W x H x D) | 80 x 145 x 24mm |
Close
Swallow Staple Gun Tacker For Plastic Staples JY-550A
Used by forestry commissions, sawmills, timber merchants and garden centres. For the simple labelling and marking of wood, lumber, timber, fencing and other wood products.
Avoid damages to tools, saws or planks. The staples are rustproof, weatherproof and UV resistant.
Types of staple that can be used: 6mm-8mm of all the staples below
- Jann Yei 1110PH
- Jann Yei 1308PL
- Jann Yei 1309PL
- Jann Yei 1310PH
- Omer 81P
- Omer 82P
- Raptor S/05-25
- Raptor SH/05-37
- Taga Plus TA1010
Close
Nestamp Humidity & Temperature Controller ND-800
- Automatic Calibrate
- Digital Display & Accurate Probe
- Temperature & Humidity Separate Control
- Dimension (W x H x D) : 215 x 165 x 67mm
Close
Nestamp Continuity Tester CT333
| Wire Verification Distance | 3000 meters (26 Gage min.) |
|---|---|
| Beeper Sound | About 85dB |
| Continuity Confirmation | Equal to or less than 2KΩ |
| Fuse | 0.5A/250V |
| Power Supply | 9V Battery, 6F22 or equivalent |
| Operating Environment | -10°C~45°C, <85%RH |
| Storage Environment | -10°C~50°C, <85%RH |
| Dimension (W x H x D) | 75 x 115 x 29mm (with test leads folded) |
| Weight | About 111g (including battery) |
Close
Vetus Tweezer SS-SA
- Fine Tip Straight (140mm)
- Non-Magnetic
- Anti Acid Steel