Showing 73–108 of 129 results

Swallow Sound Piezo Tweeter SB-307M

 
Power RMS/Max 75W/150W
Impedance 4 to 8 Ohm
Frequency Response 4KHz - 27KHz
Sensitivity 105dB
Dimension (W x H x D) 187 x 80 x 105mm
sb307m

Nestamp Piezo Tweeter NX-2

 
Maximum Power 75W (EIA RS426)
Handling Capacity 8 Ohm System Reference
Frequency Response 4KHz - 27KHz
Average Sensitivity 94dB (1 watt / 1 meter)
Maximum Voltage 15 V rms continuous
35 V rms intermittent
Dimension (W x H x D) 147 x 68 x 52mm
nx2

Nestamp Piezo Tweeter NX-5

 
Maximum Power 75W (EIA RS426)
Handling Capacity 8 Ohm System Reference
Frequency Response 4KHz - 27KHz
Average Sensitivity 94dB (1 watt / 1 meter)
Maximum Voltage 15 V rms continuous
35 V rms intermittent
Dimension (W x H x D) 147 x 68 x 52mm
nx5

Nestamp Piezo Tweeter NX-9

 
Maximum Power 75W (EIA RS426)
Handling Capacity 8 Ohm System Reference
Frequency Response 4KHz - 27KHz
Average Sensitivity 94dB (1 watt / 1 meter)
Maximum Voltage 15 V rms continuous
35 V rms intermittent
Dimension (W x H x D) 88 x 88 x 90mm
nx9

Elseve Piezo Tweeter PZ-8

Power RMS/Max 150W/300W
Impedance 4 to 8 Ohm
Frequency Response 5KHz - 20KHz
Sensitivity 105dB
Dispersion 40°H x 55°V – 6dB Points
Dimension (W x H x D) 85 x 85 x 78mm
pz8

Elseve Piezo Tweeter PZ-12

Power RMS/Max 150W/300W
Impedance 4 to 8 Ohm
Frequency Response 5KHz - 20KHz
Sensitivity 105dB
Dispersion 40°H x 55°V – 6dB Points
Dimension (W x H x D) 147 x 68 x 60mm
pz12

Elseve Piezo Tweeter PZ-16

Power RMS/Max 150W/300W
Impedance 4 to 8 Ohm
Frequency Response 5KHz - 20KHz
Sensitivity 105dB
Dispersion 40°H x 55°V – 6dB Points
Dimension (W x H x D) 187 x 80 x 105mm
pz16

Nestamp Humidity Controller ND-500

  • Automatic Calibrate
  • Digital Display & Accurate Probe
  • Humidity Control
  • Dimension (W x H x D) : 162 x 165 x 67mm
nd500

Nestamp Humidity & Temperature Controller ND-800

  • Automatic Calibrate
  • Digital Display & Accurate Probe
  • Temperature & Humidity Separate Control
  • Dimension (W x H x D) : 215 x 165 x 67mm
nd800

Nestamp Timer Controller ND-600

  • 6 Timing Modes: 1-6 Hours
  • Auto Power On/Off Switching
  • Manage 2 to 4 Socket Connectors
  • Dimension (W x H x D) : 220 x 148 x 65mm
nd600

Nestamp Humidity & Temperature Sensor D-50

  • Accurate Humidity & Temperature Probe
  • 15 Meters Long Cable
d50

Nestamp Continuity Tester CT333

Wire Verification Distance 3000 meters (26 Gage min.)
Beeper Sound About 85dB
Continuity Confirmation Equal to or less than 2KΩ
Fuse 0.5A/250V
Power Supply 9V Battery, 6F22 or equivalent
Operating Environment -10°C~45°C, <85%RH
Storage Environment -10°C~50°C, <85%RH
Dimension (W x H x D) 75 x 115 x 29mm (with test leads folded)
Weight About 111g (including battery)
ct333

Nestamp Moisture Meter M222

  • LED Indication
  • Mini Size
  • Data Hold Features
  • Auto Power Off With Low Battery Indication
  • Wood 6-60%, Material 0.2-2.9%, Temperature 0~40°C or 32~99°F
  • Dimension (W x H x D) : 45 x 85 x 15mm

Nestamp Sound Detector FSD-Q5

Limit Range 30 to 130dB
Resolution 0.1dB
Frequency Range 31.5Hz to 8KHz
Sensor Type 27mm (1.1") piezoelectric mic.
Operating Humidity Less than 80% RH
Power Source 9V Battery
Low Battery Indication Red LED flashing
Battery Life 180 hours continuous (approx); 30 days @ 6 hours/day
Dimension (W x H x D) 45 x 115 x 37mm
Weight 56g
fsdq5

Nestamp Focus+ Headlight HLC-Q7

One of the major advantages of headlights is that they free up users’ hands for a variety tasks. With NESTAMP HLC-Q7, users can achieve even more. This new member of the Focus+ headlight series is a feast of luminaire technologies. Right at the center of HLC-Q7 is a XP-E [Q4] Cree White LED. Taking full control of this latest Cree product, a revolutionary design is implemented. When the Operation Button is depressed, the LED outputs at the peak 125 lumens, then dims in a smooth run. Just release the finger at any time of the desired level of balance between illumination and battery life. Another advanced output regulating mechanism, Focus Control, is also available by twisting the iris ring that surrounds the core LED. Whether for night trail walk, campsite reading or garage chores, there’s always the right mode for the requisite illumination. Lined up under the white, crowned gem in a smiling curve are four 5mm LEDs, two in red and one each in green and in blue. They serve a variety of purposes. The red duo is generally used for night vision. In less a romantic emergency situation, they can flash out the international SOS code. The green LED is for map reading and signaling while blue illumination helps telling blood from other fluids. For the best user experience, the core and auxiliary emitters are controlled and operated independently. With adjustable light angle adding further to the high degree of flexibility, the versatile HLC-Q7 is an all-in-one solution for multi-range users.
  • XP-E [Q4] Cree White LED - Up to 125 Lumens
  • XP-E [Q4] Cree White LED - Lifetime Up to 50,000 Hours
  • ø5mm Colour LEDs - Red, Blue & Green
  • Smooth Dimming Control for White LED
  • Focus Control Function for White LED
  • SOS-Flashing for Red LEDs
  • Free Projection Angle
  • Water Resistant
  • Dimension (W x H x D) : 62 x 50 x 43mm
hlcq7

Nestamp AC Fan NA-120HAS

  • AC 220-240V
  • 0.12/0.11A 26.4W
  • Sleeve Bearing
  • Metal Frame
  • Dimension (W x H x D) : 120 x 120 x 38.5mm
na120has

Nestamp AC Fan NA-120HASW

  • AC 220-240V
  • 0.12/0.11A 26.4W
  • Sleeve Bearing
  • Metal Frame
  • Dimension (W x H x D) : 120 x 120 x 38.5mm
na120hasw

Nestamp DC Fan NA-180HAJ

  • DC 48V
  • 0.7A 33.6W
  • Ball Bearing
  • Metal Frame
  • Dimension (W x H x D) : 120 x 120 x 38.5mm
na180haj

Nestamp AC Fan NA-170HAB

  • AC 220-240V
  • 0.12/0.11A 26.4W
  • Ball Bearing
  • Metal Frame
  • Dimension (W x H x D) : 170 x 150 x 51mm
na170hab

Nestamp 2Cx30/0.18mm Cable (Pink)

  • 100% Tinted Copper
  • 100 Meters
Diameter of single strand 0.18 mm ± 0.005 mm
Thickness 1.00 mm ± 0.10 mm
Overall Diameter 3.10 mm x 6.20 mm
Max Conductor Resistance at 20°C 26.0 Ω / KM
Min Insulation Resistance at 70°C 0.011 MΩ / KM

Nestamp 2Cx30/0.18mm Cable (Blue)

  • 100% Tinted Copper
  • 100 Meters
Diameter of single strand 0.18 mm ± 0.005 mm
Thickness 1.00 mm ± 0.10 mm
Overall Diameter 3.10 mm x 6.20 mm
Max Conductor Resistance at 20°C 26.0 Ω / KM
Min Insulation Resistance at 70°C 0.011 MΩ / KM

Nestamp Replacement Ceramic Kit D-05

  • 1.7MHz, Φ20mm Ceramic Disc
  • Replacement Ceramic Kit
  • Comes With Key Tools
  • Dimension (W x H x D) : 108 x 180 x 2mm
d05

Nestamp Condenser C-100

  • 4.7µF 100V
  • Temp. -25°C~85°C
  • Dimension (W x H x D) : 38 x 25 x 14mm
c100

Nestamp Condenser C-200

  • 4.7µF 100V
  • Temp. -25°C~85°C
  • Dimension (W x H x D) : 38 x 25 x 14mm
c200

Swallow Staple Gun Tacker For Plastic Staples JY-550A

Used by forestry commissions, sawmills, timber merchants and garden centres. For the simple labelling and marking of wood, lumber, timber, fencing and other wood products. Avoid damages to tools, saws or planks. The staples are rustproof, weatherproof and UV resistant. Types of staple that can be used: 6mm-8mm of all the staples below
  • Jann Yei 1110PH
  • Jann Yei 1308PL
  • Jann Yei 1309PL
  • Jann Yei 1310PH
  • Omer 81P
  • Omer 82P
  • Raptor S/05-25
  • Raptor SH/05-37
  • Taga Plus TA1010
Dimension (W x H x D) : 200 x 150 x 30mm jy550a

Swallow 3 Way Staple Gun Tacker JY-821

Used by forestry commissions, sawmills, timber merchants and garden centres. For the simple labelling and marking of wood, lumber, timber, fencing and other wood products. Types of staple that can be used 6-14mm x 10.6mm
  • Jann Yei 906F, 908F, 910F, Rapid #13
6-14mm x 11.3mm
  • Arrow JT21
  • Esco #530
  • KWB #053
  • Novus #53
  • Rapid #53
  • Rocafix #3
  • Stanley #A/53
  • Jann Yei 1006F, 1008F, 1010F, 1012F, 1014F
15mm
  • Arrow 1810
  • Esco #300
  • Jann Yei T15
  • Novus #J
  • Rocafix #8
Dimension (W x H x D) : 160 x 100 x 27mm jy821

Swallow Hammer Tacker For Plastic Staples JY-590A

Used by forestry commissions, sawmills, timber merchants and garden centres. For the simple labelling and marking of wood, lumber, timber, fencing and other wood products. Avoid damages to tools, saws or planks. The staples are rustproof, weatherproof and UV resistant. Types of staple that can be used: 6mm-10mm: Jann Yei 1308PL, Omer 81P, Raptor S/05-25 Dimension (W x H x D) : 305 x 55 x 40mm jy590a

Swallow Plastic Staples 1308PL (1.15mm)

  • Staples (1.15mm)
  • 1120 pcs
  • Weatherproof and UV Resistant
  • Rustproof
  • Made In Taiwan
  • Dimension (W x H x D) : 60 x 140 x 20mm

Swallow Staples 1014F (14mm)

  • Staples (14mm)
  • 1000 pcs
  • Made In Taiwan
  • Dimension (W x H x D) : 75 x 120 x 15mm

Swallow Staples T15 (15mm)

  • Staples (15mm)
  • 1000 pcs
  • Made In Taiwan
  • Dimension (W x H x D) : 75 x 63 x 15mm

Xstop Electric Fence Energizer BA80

The electric fence is a simple and effective way to create secure zones. The ease of installation and use of this product can electrify all the amenities. Required for a variety of animals. This energizer is suitable for a variety of applications including the protection of gardens, parks, pools, plantations as well as livestock. This energizer is made with products which conform to standards installed according to the manufacturers' instructions. The discomfort caused by making contact with the fence will not cause injury, and will result in training of animals that meet the limits of the enclosure. The electric fence is not dangerous for children or sensitive individuals.
Input Voltage DC12V
Output 0.6 Joules / 10km
Dimension (W x H x D) 110 x 185 x 47mm

Xstop Electric Fence Energizer EL90

The electric fence is a simple and effective way to create secure zones. The ease of installation and use of this product can electrify all the amenities. Required for a variety of animals. This energizer is suitable for a variety of applications including the protection of gardens, parks, pools, plantations as well as livestock. This energizer is made with products which conform to standards installed according to the manufacturers' instructions. The discomfort caused by making contact with the fence will not cause injury, and will result in training of animals that meet the limits of the enclosure. The electric fence is not dangerous for children or sensitive individuals.
Input Voltage AC 240V 50Hz
Output 0.5 Joules / 10km
Dimension (W x H x D) 110 x 185 x 47mm

Xstop Electric Fence Energizer EL101

The electric fence is a simple and effective way to create secure zones. The ease of installation and use of this product can electrify all the amenities. Required for a variety of animals. This energizer is suitable for a variety of applications including the protection of gardens, parks, pools, plantations as well as livestock. This energizer is made with products which conform to standards installed according to the manufacturers' instructions. The discomfort caused by making contact with the fence will not cause injury, and will result in training of animals that meet the limits of the enclosure. The electric fence is not dangerous for children or sensitive individuals.
Input Voltage AC 240V 50Hz
Output 1 Joules / 20km
Dimension (W x H x D) 110 x 185 x 47mm

Audax Harbor Wall Clock 1950

Bring some gleaming, Harbor 1950s charm into your interior space, with the Audax Wall Clock perfectly round and encased in shiny-metal, with a chrome finish, the 40cm timepiece will perk-up any tired wall space. The silent sweep of the slim second-hand, means no ticking, making it an ideal bedroom clock, or for any room you like to have a bit of quiet-time. An ideal housewarming present or gift for any special occasion, the 50s charisma and slick design of the Audax Clock will create smiles all round. The off-white clock-face highlights the black, retro-inspired numbers and red and green clock hands, ensuring the timepiece will make a design-statement on any wall space. With both 1950s design charisma and contemporary functionality, welcome addition to any home, and will be enjoyed for years to come. Specifications
  • Attractive printed dial
  • Metal casing and hands
  • Sweep movement (Taiwan)
  • Convex glass lens
  • Colour : Black
  • Battery : 1 x AA battery
  • Weight : 1.88kg
  • Dimension (W x H x D) : 400 x 400 x 110mm

Nestamp Humidity Thermometer Clock DT-800

Temperature Range Indoor -10°C~50°C (+14°F~122°F)
Outdoor -50°C~90°C (-58°F~194°F)
Indoor Humidity Range 20%~90% RH
Power Supply 1.5V (AAA size x 1)
Dimension (W x H x D) 80 x 145 x 24mm
*Time & Date Display dt800