Swallow Sound Horn Tweeter SHD-210
| Power Capacity | 23 Watts RMS |
|---|---|
| Nominal Impedance | 8 Ohm |
| Sensitivity (1W/1M) | 106dB |
| Frequency Range | 1.5KHz - 18KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 Inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Material | Engineering Plastic |
| Flux Density | 1.35T |
| Magnet | Neodymium N-38 |
| Dimension (W x H x D) | 86 x 86 x 87 mm |
Swallow Sound Horn Tweeter SHD-220
| Power Capacity | 23 Watts RMS |
|---|---|
| Nominal Impedance | 8 Ohm |
| Sensitivity (1W/1M) | 106dB |
| Frequency Range | 1.5KHz - 18KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 Inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Material | Engineering Plastic |
| Flux Density | 1.35T |
| Magnet | Neodymium N-38 |
| Dimension (W x H x D) | 107 x 107 x 87 mm |
Swallow Sound Horn Tweeter SHD-230
| Power Capacity | 23 Watts RMS |
|---|---|
| Nominal Impedance | 8 Ohm |
| Sensitivity (1W/1M) | 106dB |
| Frequency Range | 1.5KHz - 18KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 Inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Material | Engineering Plastic |
| Flux Density | 1.35T |
| Magnet | Neodymium N-38 |
| Dimension (W x H x D) | 89 x 89 x 105 mm |
Swallow Sound Horn Tweeter SHD-240
| Power Capacity | 23 Watts RMS |
|---|---|
| Nominal Impedance | 8 Ohm |
| Sensitivity (1W/1M) | 106dB |
| Frequency Range | 1.5KHz - 18KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 Inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Material | Engineering Plastic |
| Flux Density | 1.35T |
| Magnet | Neodymium N-38 |
| Dimension (W x H x D) | 186 x 78 x 118mm |
Swallow Sound Horn Tweeter SHD-250
| Power Capacity | 28 Watts RMS |
|---|---|
| Nominal Impedance | 8 Ohm |
| Sensitivity (1W/1M) | 107dB |
| Frequency Range | 1.6KHz - 20KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 Inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Material | Engineering Plastic |
| Flux Density | 1.6T |
| Magnet | Neodymium N-45 |
| Dimension (W x H x D) | 120 x 70 x 85mm |
Swallow Sound Horn Tweeter SHD-260
| Power Capacity | 28 Watts RMS |
|---|---|
| Nominal Impedance | 8 Ohm |
| Sensitivity (1W/1M) | 107dB |
| Frequency Range | 1.6KHz - 20KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 Inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Material | Engineering Plastic |
| Flux Density | 1.6T |
| Magnet | Neodymium N-45 |
| Dimension (W x H x D) | 186 x 78 x 124mm |
Swallow Sound Horn Tweeter SHD-280
| Power Capacity | 28 Watts RMS |
|---|---|
| Nominal Impedance | 8 Ohm |
| Sensitivity (1W/1M) | 107dB |
| Frequency Range | 1.6KHz - 20KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 Inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Material | Engineering Plastic |
| Flux Density | 1.6T |
| Magnet | Neodymium N-45 |
| Dimension (W x H x D) | 115 x 115 x 100 mm |
Swallow Sound Horn Tweeter SHD-300
| Power Capacity | 28 Watts RMS |
|---|---|
| Nominal Impedance | 8 Ohm |
| Sensitivity (1W/1M) | 107dB |
| Frequency Range | 1.6KHz - 20KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 Inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Material | Engineering Plastic |
| Flux Density | 1.6T |
| Magnet | Neodymium N-45 |
| Dimension (W x H x D) | 150 x 150 x 285mm |
Swallow Sound Horn Tweeter SHD-400
| Power Capacity | 28 Watts RMS |
|---|---|
| Nominal Impedance | 8 Ohm |
| Sensitivity (1W/1M) | 107dB |
| Frequency Range | 1.6KHz - 20KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 Inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Material | Engineering Plastic |
| Flux Density | 1.6T |
| Magnet | Neodymium N-45 |
| Dimension (W x H x D) | 290 x 290 x 175mm |
Swallow Sound Horn Tweeter SHD-500
| Power Capacity | 28 Watts RMS |
|---|---|
| Nominal Impedance | 8 Ohm |
| Sensitivity (1W/1M) | 107dB |
| Frequency Range | 1.6KHz - 20KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 Inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Material | Engineering Plastic |
| Flux Density | 1.6T |
| Magnet | Neodymium N-45 |
| Dimension (W x H x D) | 350 x 350 x 210mm |
Swallow Sound Hybrid Power Amplifier SS-99N
| Power Output (RMS) | 2 x 156W (4Ω) / 2 x 110W (8Ω) |
|---|---|
| Total Harmonic Distortion (THD) | Less than 0.2% |
| Frequency Response | 1W ±0.2dB (20Hz-20KHz) |
| S/N Ratio | 92 dB |
| Input Sensitivity | 250mV V ±dB (8Ω) |
| Input Impedance | 47 KΩ |
| Effect Output | 156/25 W/V (1KHZ/4Ω) / 110/29.6 W/V (1KHZ/8Ω) |
| Power Requirements | AC 220-240V, 50/60Hz |
| Dimension (W x H x D) | 430 x 140 x 390mm |
| Weight | 10 KGS |
Swallow Sound Piezo Tweeter SB-120
Swallow Sound Piezo Tweeter SB-140
Swallow Sound Piezo Tweeter SB-120M
Swallow Sound Piezo Tweeter SB-140M
Swallow Sound Piezo Tweeter SB-307M
Swallow Staple Gun Tacker For Plastic Staples JY-550A
Used by forestry commissions, sawmills, timber merchants and garden centres. For the simple labelling and marking of wood, lumber, timber, fencing and other wood products.
Avoid damages to tools, saws or planks. The staples are rustproof, weatherproof and UV resistant.
Types of staple that can be used: 6mm-8mm of all the staples below
- Jann Yei 1110PH
- Jann Yei 1308PL
- Jann Yei 1309PL
- Jann Yei 1310PH
- Omer 81P
- Omer 82P
- Raptor S/05-25
- Raptor SH/05-37
- Taga Plus TA1010
Swallow 3 Way Staple Gun Tacker JY-821
Used by forestry commissions, sawmills, timber merchants and garden centres. For the simple labelling and marking of wood, lumber, timber, fencing and other wood products.
Types of staple that can be used
6-14mm x 10.6mm
- Jann Yei 906F, 908F, 910F, Rapid #13
- Arrow JT21
- Esco #530
- KWB #053
- Novus #53
- Rapid #53
- Rocafix #3
- Stanley #A/53
- Jann Yei 1006F, 1008F, 1010F, 1012F, 1014F
- Arrow 1810
- Esco #300
- Jann Yei T15
- Novus #J
- Rocafix #8
Swallow Hammer Tacker For Plastic Staples JY-590A
Used by forestry commissions, sawmills, timber merchants and garden centres. For the simple labelling and marking of wood, lumber, timber, fencing and other wood products.
Avoid damages to tools, saws or planks. The staples are rustproof, weatherproof and UV resistant.
Types of staple that can be used:
6mm-10mm: Jann Yei 1308PL, Omer 81P, Raptor S/05-25
Dimension (W x H x D) : 305 x 55 x 40mm
jy590a
