Audax Hybrid Power Amplifier X6
- Power Output Level (RMS) : 2x80W (4Ω) - 2x60W (8Ω)
- Total Harmonic Distortion (THD) : Less than 0.2%
- Frequency Response : 1W+/-0.2dB (20Hz-20KHz)
- S/N Ratio : 85dB
- Input Sensitivity : 250mVV+/-dB (8 Ohm)
- Input Impedance : 20K Ohm
- Effect Output : 80-18W/V (1KHz-4Ω) - 60-22W/V (1KHz-8Ω)
- Input Voltage : 240V 50Hz/60Hz
- Single VU Level Meter
- Wireless Bluetooth
- USB & SD Card Maximum Size 32GB
- Dimension (W x H x D) : 430 x 135 x 370mm
- Weight : 6.6kg
Audax Portable PA Speaker PR-6V
The Audax Smartray PR-6V is the ideal solution for voice and music transmission on the go. The 2—way speaker with a 6.5"wooferand a 1" compression driver is operated with a rechargeable battery for up to 6 hours.
The Audax Smartray PR-6V is powered by a class D power amplifier with a highly efficient power supply. The Smartray PR-6V relies fully on wireless transmission: it has a FM radio receiver, On-board Bluetooth player with backlit multifunction display, equalizer, USB port and SD card slot supports the mp3, wma and wav formats.
PR6V
Audax Portable PA Speaker PS-8V
The Audax Smartray PS-8V is the ideal solution for voice and music transmission on the go. The 2—way speaker with a 8" woofer and a 1" compression driver is operated with a rechargeable battery for up to 6 hours. The Audax Smartray PS-8V is powered by a class D power amplifier with a highly efficient power supply. The Smartray PS-8V relies fully on wireless transmission: it has a FM radio receiver, On-board Bluetooth player with backlit multifunction display, equalizer, USB port and SD card slot supports the mp3, wma and wav formats.
PS8V
Audax Portable PA Speaker PR-8V
The Audax Smartray PR-8V is the ideal solution for voice and music transmission on the go. The 2—way speaker with a 8" woofer and a 1" compression driver is operated with a rechargeable battery for up to 6 hours.
The Audax Smartray PR-8V is powered by a class D power amplifier with a highly efficient power supply. The Smartray PR-8V relies fully on wireless transmission: it has a FM radio receiver, On-board Bluetooth player with backlit multifunction display, equalizer, USB port and SD card slot supports the mp3, wma and wav formats.
PR8V
Audax Portable PA Speaker PR-12V
The Audax Wideline PR-12V is the ideal solution for voice and music transmission on the go. The 2-way speaker with a 12" woofer and a 1" compression driver is operated with a rechargeable battery for up to 6 hours. The Audax Wideline PR-12V is powered by a class D power amplifier with a highly efficient power supply. The Wideline PR—12V relies fully on wireless transmission: it has an REC, FM radio receiver, On-board Bluetooth player with backlit multifunction display, equalizer, USB port and SD card slot supports the mp3, wma and wav formats.
PR12V
Audax Portable PA Speaker PR-15V
The Audax Wideline PR-15V is the ideal solution for voice and music transmission on the go. The 2-way speaker with a 15" woofer and a 1" compression driver is operated with a rechargeable battery for up to 6 hours. The Audax Wideline PR-15V is powered by a class D power amplifier with a highly efficient power supply. The Wideline PR-15V relies fully on wireless transmission: it has an REC, FM radio receiver, On-board Bluetooth player with backlit multifunction display, equalizer, USB port and SD card slot supports the mp3, wma and wav formats.
PR15V
Audax Portable PA Speaker PS-15V
The Audax Wideline PS-15V is the ideal solution for voice and music transmission on the go. The 2—way speaker with a 15" woofer and a 1" compression driver is operated with a rechargeable battery for up to 6 hours. The Audax Wideline PS-15V is powered by a class D power amplifier with a highly efficient power supply. The Wideline PS-15V relies fully on wireless transmission: it has an REC, FM radio receiver, On-board Bluetooth player with backlit multifunction display, equalizer, USB port and SD card slot supports the mp3, wma and wav formats.
PS15V
Audax Louder III Loudspeaker BR-3
| Output Power | 10W |
|---|---|
| Speaker Impedance | 4Ω |
| Neodymium Speaker | 3" Full Range Speaker |
| Frequency Response | 90Hz - 18KHz / 1KHz ±1dB |
| Sensitivity | 53dB V/A ±3dB |
| Playback time (Music mode) | About 12~15 hours (50% volume) |
| Playback Time (Microphone Mode) | About 18 - 24 Hours |
| Working Temperature | -10°C ~ 45°C |
| Sound Coverage | About 400~500m² |
| Input Signal | Microphone |
| Input Audio | USB / Micro SD |
| Headset | Microphone 600 Ω |
| Battery | 3.7V / 2,200mAh Lithium Battery (18650) |
| Charging Voltage | DC 5V, 500mA |
| Charging Time | About 4~5 hours |
| Cabinet Material | ABS |
| Color | Black |
| Dimension (W x H x D) | 86 x 105 x 40mm |
| Weight | 168 g |
Audax Louder V Loudspeaker BR-5
| Output Power | 10W |
|---|---|
| Speaker Impedance | 2Ω + 2Ω |
| Neodymium Speaker | 3" Dual Voice Coil Driver |
| Frequency Response | 90Hz - 18KHz / 1KHz ±1dB |
| Sensitivity | 53dB V/A ±3dB |
| Playback time (Music mode) | About 12~15 hours (50% volume) |
| Playback Time (Microphone Mode) | About 18 - 24 Hours |
| Working Temperature | -10°C ~ 45°C |
| Sound Coverage | About 400~500m² |
| Input Signal | Microphone |
| Input Audio | USB / Micro SD |
| Headset | Microphone 600 Ω |
| Battery | 3.7V / 2,200mAh Lithium Battery (18650) |
| Charging Voltage | DC 5V, 500mA |
| Charging Time | About 4~5 hours |
| Cabinet Material | ABS |
| Color | Black |
| Dimension (W x H x D) | 92 x 130 x 50mm |
| Weight | 291 g |
Audax Horn Tweeter AX-1
| Nominal Impedance | 8 Ohm |
|---|---|
| Power Capacity | 28 Watts RMS (Pink Noise Signal – 12db/OCT) |
| Sensitivity (1W/1M) | 107 dB |
| Frequency Range | 1.5KHz – 20KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Flux Density | 1.6T |
| Magnet | Neodymium N-45 |
| Material | ABS Black Polycarbonate |
| Protector | Resettable Fuse |
| Capacitor | 4.7uf 100V |
| Nett Weight | 171g |
Audax Horn Tweeter AX-1R
| Nominal Impedance | 8 Ohm |
|---|---|
| Power Capacity | 28 Watts RMS (Pink Noise Signal – 12db/OCT) |
| Sensitivity (1W/1M) | 107 dB |
| Frequency Range | 1.5KHz – 20KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Flux Density | 1.6T |
| Magnet | Neodymium N-45 |
| Material | ABS with Glass Filled Red Polycarbonate |
| Protector | Resettable Fuse |
| Capacitor | 4.7uf 100V |
| Nett Weight | 171g |
Audax Horn Tweeter AX-2
| Nominal Impedance | 8 Ohm |
|---|---|
| Power Capacity | 28 Watts RMS (Pink Noise Signal – 12db/OCT) |
| Sensitivity (1W/1M) | 107 dB |
| Frequency Range | 1.5KHz – 20KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Flux Density | 1.6T |
| Magnet | Neodymium N-45 |
| Material | ABS Black Polycarbonate |
| Protector | Resettable Fuse |
| Capacitor | 4.7uf 100V |
| Nett Weight | 176g |
Audax Horn Tweeter AX-2R
| Nominal Impedance | 8 Ohm |
|---|---|
| Power Capacity | 28 Watts RMS (Pink Noise Signal – 12db/OCT) |
| Sensitivity (1W/1M) | 107 dB |
| Frequency Range | 1.5KHz – 20KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Flux Density | 1.6T |
| Magnet | Neodymium N-45 |
| Material | ABS with Glass Filled Red Polycarbonate |
| Protector | Resettable Fuse |
| Capacitor | 4.7uf 100V |
| Nett Weight | 176g |
Audax Horn Tweeter AX-3
| Nominal Impedance | 8 Ohm |
|---|---|
| Power Capacity | 28 Watts RMS (Pink Noise Signal – 12db/OCT) |
| Sensitivity (1W/1M) | 107 dB |
| Frequency Range | 1.5KHz – 20KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Flux Density | 1.6T |
| Magnet | Neodymium N-45 |
| Material | ABS Black Polycarbonate |
| Protector | Resettable Fuse |
| Capacitor | 4.7uf 100V |
| Nett Weight | 191g |
Audax Horn Tweeter AX-4
| Nominal Impedance | 8 Ohm |
|---|---|
| Power Capacity | 28 Watts RMS (Pink Noise Signal – 12db/OCT) |
| Sensitivity (1W/1M) | 107 dB |
| Frequency Range | 1.5KHz – 20KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Flux Density | 1.6T |
| Magnet | Neodymium N-45 |
| Material | ABS Black Polycarbonate |
| Protector | Resettable Fuse |
| Capacitor | 4.7uf 100V |
| Nett Weight | 207g |
Audax Horn Tweeter AX-4R
| Nominal Impedance | 8 Ohm |
|---|---|
| Power Capacity | 28 Watts RMS (Pink Noise Signal – 12db/OCT) |
| Sensitivity (1W/1M) | 107 dB |
| Frequency Range | 1.5KHz – 20KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Flux Density | 1.6T |
| Magnet | Neodymium N-45 |
| Material | ABS with Glass Filled Red Polycarbonate |
| Protector | Resettable Fuse |
| Capacitor | 4.7uf 100V |
| Nett Weight | 207g |
Audax Horn Tweeter AX-5
| Nominal Impedance | 8 Ohm |
|---|---|
| Power Capacity | 28 Watts RMS (Pink Noise Signal – 12db/OCT) |
| Sensitivity (1W/1M) | 107 dB |
| Frequency Range | 1.5KHz – 20KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Flux Density | 1.6T |
| Magnet | Neodymium N-45 |
| Material | ABS Black Polycarbonate |
| Protector | Resettable Fuse |
| Capacitor | 4.7uf 100V |
| Nett Weight | 188g |
Audax Horn Tweeter AX-5R
| Nominal Impedance | 8 Ohm |
|---|---|
| Power Capacity | 28 Watts RMS (Pink Noise Signal – 12db/OCT) |
| Sensitivity (1W/1M) | 107 dB |
| Frequency Range | 1.5KHz – 20KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Flux Density | 1.6T |
| Magnet | Neodymium N-45 |
| Material | ABS with Glass Filled Red Polycarbonate |
| Protector | Resettable Fuse |
| Capacitor | 4.7uf 100V |
| Nett Weight | 188g |
Audax Horn Tweeter AX-6
| Nominal Impedance | 8 Ohm |
|---|---|
| Power Capacity | 28 Watts RMS (Pink Noise Signal – 12db/OCT) |
| Sensitivity (1W/1M) | 107 dB |
| Frequency Range | 1.5KHz – 20KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Flux Density | 1.6T |
| Magnet | Neodymium N-45 |
| Material | ABS Black Polycarbonate |
| Protector | Resettable Fuse |
| Capacitor | 4.7uf 100V |
| Nett Weight | 245g |
Audax Horn Tweeter AX-7
| Nominal Impedance | 8 Ohm |
|---|---|
| Power Capacity | 28 Watts RMS (Pink Noise Signal – 12db/OCT) |
| Sensitivity (1W/1M) | 107 dB |
| Frequency Range | 1.5KHz – 20KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Flux Density | 1.6T |
| Magnet | Neodymium N-45 |
| Material | ABS Black Polycarbonate |
| Protector | Resettable Fuse |
| Capacitor | 4.7uf 100V |
| Nett Weight | 196g |
Audax Horn Tweeter AX-7R
| Nominal Impedance | 8 Ohm |
|---|---|
| Power Capacity | 28 Watts RMS (Pink Noise Signal – 12db/OCT) |
| Sensitivity (1W/1M) | 107 dB |
| Frequency Range | 1.5KHz – 20KHz |
| Diaphragm Material | Titanium |
| Voice Coil Diameter | 1 inch (25.4mm) |
| Voice Coil Material | Round Copper |
| Flux Density | 1.6T |
| Magnet | Neodymium N-45 |
| Material | ABS with Glass Filled Red Polycarbonate |
| Protector | Resettable Fuse |
| Capacitor | 4.7uf 100V |
| Nett Weight | 196g |
Audax Piezo Tweeter AX-20
| Frequency Response | 4KHz - 27KHz |
|---|---|
| Average Sensitivity | 94dB (1 watt / 1 meter) |
| Maximum Power | 75W (EIA RS426) |
| Handling Capacity | 8 Ohm system reference |
| Maximum Voltage | 15V rms continuous 35V rms intermittent |
| Diaphragm Material | Piezo Ceramic |
| Ceramic Element | 27mm (diameter), 0.08mm (thickness) |
| Product Material | ABS Plastic |
| Product Weight | 55 grams |
| Dimension (W x H x D) | 14.6 x 6.7 x 5.8cm |
Audax Piezo Tweeter AX-21
| Frequency Response | 4KHz - 27KHz |
|---|---|
| Average Sensitivity | 94dB (1 watt / 1 meter) |
| Maximum Power | 75W (EIA RS426) |
| Handling Capacity | 8 Ohm system reference |
| Maximum Voltage | 15V rms continuous 35V rms intermittent |
| Diaphragm Material | Piezo Ceramic |
| Ceramic Element | 27mm (diameter), 0.08mm (thickness) |
| Product Material | ABS Plastic |
| Product Weight | 58 grams |
| Dimension (W x H x D) | 14.6 x 6.7 x 5.8cm |
Audax Piezo Tweeter AX-30
| Frequency Response | 4KHz - 27KHz |
|---|---|
| Average Sensitivity | 94dB (1 watt / 1 meter) |
| Maximum Power | 75W (EIA RS426) |
| Handling Capacity | 8 Ohm system reference |
| Maximum Voltage | 15V rms continuous 35V rms intermittent |
| Diaphragm Material | Piezo Ceramic |
| Ceramic Element | 27mm (diameter), 0.08mm (thickness) |
| Product Material | ABS Plastic |
| Product Weight | 60 grams |
| Dimension (W x H x D) | 16.9 x 6.7 x 6.8cm |
Audax Piezo Tweeter AX-31
| Frequency Response | 4KHz - 27KHz |
|---|---|
| Average Sensitivity | 94dB (1 watt / 1 meter) |
| Maximum Power | 75W (EIA RS426) |
| Handling Capacity | 8 Ohm system reference |
| Maximum Voltage | 15V rms continuous 35V rms intermittent |
| Diaphragm Material | Piezo Ceramic |
| Ceramic Element | 27mm (diameter), 0.08mm (thickness) |
| Product Material | ABS Plastic |
| Product Weight | 63 grams |
| Dimension (W x H x D) | 16.9 x 6.7 x 6.8cm |
Audax Piezo Tweeter AX-60
